Product 03
Crack Proof. Water Proof. Long Lasting.
Two-component waterproof protection system — seals cracks, stops flaking, and forms a durable reinforced coating on all masonry surfaces.
2 Parts
1 Part
Mix at 2:1 ratio (Part A to Part B) for full performance
Two-component technology for comprehensive crack protection and waterproofing.
Acts simultaneously as a lamination coat and a base coat — eliminating the need for separate protective layers.
Cured coating forms an effective water-resistant barrier, protecting masonry from moisture ingress and staining.
Reinforcing properties bridge existing hairline cracks and provide elasticity to prevent new cracks from forming.
Securely bonds paint to the substrate — prevents the dreaded peeling and flaking paint cycle on problem surfaces.
Effective on both interior walls and exterior facades — one system for comprehensive whole-building protection.
Durable two-component chemistry ensures the coating retains its protective properties over an extended period.
Buildings with recurring exterior flaking, efflorescence, or paint failure benefit most from Anti-Flaking treatment.
Parapets, podiums, water tanks, and below-ground areas prone to moisture seepage or direct water contact.
Aged masonry and concrete that shows surface deterioration, loose paint, or hairline crack networks.
Below-grade walls and floors that see intermittent moisture or seasonal dampness from ground-level water.
Bridges, columns, slabs, and retaining walls where waterproof surface protection is critical.
Interior wet areas where persistent moisture causes recurring flaking and surface damage to paint.
Two-component system — proper mixing is critical to performance.
Remove all loose paint, flaking material, dust, grease, and efflorescence. Surface should be structurally sound and free of active water leakage before application.
Mix Part A and Part B in a 2:1 ratio by volume. Stir thoroughly until a homogeneous mixture is achieved. Use only as much mixed product as can be applied within the pot life.
Apply the mixed Anti-Flaking coating evenly to the prepared surface using a brush, roller, or spray. Ensure complete coverage including cracks and corners. Allow to dry.
Once the first coat is dry, apply a second coat for enhanced protection. Allow full curing before applying topcoat paint or further finishing.
Ready to Order?
Contact us for bulk pricing, application guidance, or to find your nearest dealer.
