ABOUT PRODUCT

Ambhuti Roof Cool is a high SRI value ready to use coating. It is when used on the roofing surface, it reflects sunlight to greater extent and prevents the roofing material from getting heated up even during peak summer afternoon.

Since it works on the principle of continuous rejection of UV and IR rays the roofing substrate does not get heated up. So the air below the roof never gets hot keeping the room cool and comfortable. This also protects the building for a longer period extending the life of the building and preventing expansion and contraction.

APPLICATION METHOD

1. Clean the surface of application properly with wire brush and clean water

2. Allow the surface to dry before application of Ambhuti Roof Cool

3. Take the required quantity of Ambhuti Roof Cool in pan and mix upto 20% water only

Note : Mix water such that 1st coat applied is thick and 2nd coat is less thick

4. Mix well before application

5. Apply 1st coat using brush/roller on surface and allow it to dry for 2-3 hours.

Note : Ensure that the 1st coat is applied early in the morning when sun heat is low

6. Once the first coat is dried, apply the second coat properly such that the surface is completely covered with Ambhuti Roof Cool

7. Allow it to dry for around 12 hours

Note : Apply 2 coats on cement surface and 3-4 coat on metal, plastic and other similar surfaces

8. Surface is ready now ready to provide desired results

THERMAL TEST

Ambient Temperature : 40ºC

Uncoated Roofing : 65-70ºC

Coated Roofing : 40-45ºC

SALIENT PROPERTIES

Keeps your home cool

Reduce roof heat upto 20ºC

High SRI Value

Reflects : 85% UV and 90% IR rays

Low VOC : Eco friendly

Reduce electricity cost upto 40%

Low cost application and maintenance

Dust and water repellent

Reduces roof crack and increases building life

Cleans with normal water

Last for more than 5 years

Single component ready to use material

AREAS OF APPLICATION

Air conditioned building         

Warehouses           

Oil storage tanks         

Shopping malls         

Water tanks/pipelines         

Factories         

Apartments 

Houses         

Cold Storage         

Hospitals         

Cooling towers         

Railways/Metros           

Office Building                                                             

Any other surface in direct contact with sunlight